• Don't put anything into this block, just add Sticky Item before CMS section.

 

  • Don't put anything into this block, just add Sticky Item before CMS section.

 

 

leather 

 

 

   

 

 

 

King Living sources the highest quality leathers to ensure your furniture looks luxurious, is exceptionally durable and extremely comfortable.

Leather is a natural product, and as a result has a protective coating that will resist most soiling and spills. However, it still needs to be cared for using suitable products and a gentle touch. Over cleaning or poor maintenance can damage the protective layer and cause the leather to deteriorate.
To keep your leather looking luxurious and beautiful, we recommend the following maintenance tips:

 
Clean and condition your leather regularly

Pay special attention to areas that come in direct contact with skin or hair, including seats, armrests and headrests. Dust your furniture weekly or use a soft vacuum attachment, to avoid the leather being scratched by loose particles. Depending on how often you use your leather furniture, apply King-Care® Leather Cleaner and Conditioner once every 6 to 8 weeks or as required. Be careful not to clean more often than recommended, to avoid deterioration of the protective surface, avoid vigorous rubbing and never soak your leather.

 
Use only leather cleaners designed for your leather

King-Care® cleaning and conditioning products are specially formulated for King Living leathers, and will clean and protect to maximize the life of your leather. King-Care® Leather Cleaning Kits can be purchased from King Living Showrooms or Online.

A fresh stain is easier to clean than an old one

This is particularly true with leather. In many cases, spills, stains and marks that are not cleaned within a few hours can become permanent. Ensure any spills or stains are removed as soon as possible.

 
What not to use on leather

Never use detergents, alcohol, chemicals, soaps, shoe polish, wax, window cleaner, silicone, saddle soap or any cleaning product not designed specifically for your type of leather.

 
Keep pets off your furniture

minimize your pet’s contact with your furniture as the natural oils and dirt from fur can cause discolouration, unnecessary wear and tear and pilling.

 

General awareness

• Sharp or abrasive objects such as shoes, belt buckles, rings and zippers can damage furniture.

• Dye transfer from clothes, such as denim, is also possible and ink stains from pens must be attended to quickly to avoid becoming permanent. An ink-away product may assist to remove the mark.

• King Living also recommends not sitting on furniture when wearing wet swimming costumes and towels, as this can damage the leather.

• Do not attempt to use alcohol, chemicals or detergents as these may cause greater damage and discolouration.

• Professional cleaning on site every 12 to 18 months is highly recommended. Please contact us for further information at: www.kingliving.com/contact

 

 

 

 

Fabric 

 

   

 

 

 

King Living uses only the highest grade, premium fabrics for all furniture and accessories.

Every fabric in the King Living collection has been rigorously tested for seam strength, abrasion resistance, color-fastness to light, cleaning and general wear and tear.
King Living recommends the following care tips to ensure your fabrics look and feel good for a long time:

 

Clean your fabric regularly

Pay special attention to areas that come in direct contact with skin or hair, including seats, armrests and headrests. A weekly vacuum with low suction and a soft brush accessory will remove dust and damaging dirt particles, to help extend the life of your fabric and furniture.

 

A fresh stain is easier to clean than an old one

In many cases, spills, stains and marks that are not cleaned immediately can become permanent. We strongly suggest treating fabric with KingGuard+® to protect your fabric against common spills, while improving the longevity of your fabric. If you are unsure whether KingGuard+® has been applied to your fabric, please contact your King Living Showroom. If you have any questions or would like to learn more about KingGuard, please contact King-Care®. 
www.kingliving.com/kingcare

 

Use only fabric cleaners designed for your fabric

King-Care® cleaning products will clean, protect and maximize the life of your fabric. Depending on how frequently you use your furniture, apply King-Care® Fabric Cleaner and Protection every 6 to 8 weeks. King-Care® Fabric kits are available to purchase in King Living Showrooms or online. Be careful not to clean more often than recommended, avoid vigorous rubbing and never soak the fabric.

 

Pilling can occur from normal daily use

Through regular use, a single or group of loose fibers on the surface can twist and form tiny balls – also known as pilling. This is not considered a fault. Loose fibers on clothes, blankets or throws, a speck of lint or dirt is often the catalyst for this twisting. The yarns used in weaving King Living fabrics contain millions of individual fibers and the loss of a few on the surface as the fabric settles is quite normal.

A regular vacuum will help to minimize this, however pilling can be successfully removed using a Fabric Pill Remover (available from King-Care® as well as department stores/haberdasheries) and does not affect the ongoing performance of the fabric.

 

What not to use on fabric

Never use detergents, alcohol, chemicals, soaps, shoe polish, wax, window cleaner, silicone, saddle soap or any cleaning product not designed specifically for your type of fabric.

 

Steam cleaning and spot cleaning

If these cleaning methods are not performed correctly they can leave watermarks and cause cellulosic browning.

 

Avoid placing furniture near heaters

The quality of any fabric can be significantly impacted by a heater that produces sulphur compounds. When combined with humidity and oxygen, furnishing fabric can absorb these fumes, which can contribute to odour, discoloration and deterioration of the fibers.

 

Keep pets off your furniture

minimize your pet’s contact with your furniture as the natural oils and dirt from fur can cause discoloration, unnecessary wear and tear and pilling.

 

Velvet and Pile fabrics

Velvet is a luxurious textile created by a complex double weaving process that results in a densely plush nap. Shading, marking and texturing of the pile are an inherent characteristic of velvet and should not be considered a fault.

 

Use a super-absorbent cloth to soak up spills

The best approach to these types of accidents is to leave the cloth in place until most or all of the liquid has been absorbed. Then allow the fabric to air-dry. Dabbing or rubbing will make the liquid penetrate further into the fibers.

 

Fabric protection is recommended for sofas and will extend the life of your furniture

If your fabric furniture is protected with a stain repellent, we still recommend regular vacuuming and maintenance. If you require protection for your fabric, you can purchase the Fabric Care Kit, which includes a Fabric Spot Cleaner and KingGuard+® Fabric Protection, which can be applied at any time in your home. Professional cleaning on site every 12 to 18 months is highly recommended. Contact King-Care® for more information.
www.kingliving.com/kingcare

 

General awareness

• Sharp or abrasive objects such as shoes, belt buckles, rings and zippers can pull fibers,which may develop into holes.

• Dye transfer from clothes, such as denim, is also possible and ink stains from pens must be attended to quickly to avoid becoming permanent.

• Avoid sitting on furniture with wet swimming costumes or towels as this can leave a watermark on fabric, and can contribute to bleaching, mould growth and dye transfer.

• Do not attempt to use alcohol, chemicals or detergents as these may cause greater damage and discoloration.

 

 

 

Outdoor Fabric  

 

   

 

 

 

The King Living Outdoor Collection is engineered against the elements like no other furniture.
Fabrics and materials are carefully selected to stand the test of time and expertly tested for minimal maintenance.


One of the best ways to keep King Living outdoor furniture looking its best is to act quickly. This means brushing off dirt from fabric and WetherWeave™ before it becomes embedded and wiping up spills soon after a stain occurs. King Living also recommends a fortnightly hose down of your outdoor furniture or as required.

 

General Cleaning

• With a soft brush, remove any debris on furniture.

• Dampen the fabric with a light spray of water and clean with King-Care® Fabric Cleaner, or a gentle solution of mild soap and warm water (max 40°C/104°F); gently brush the solution into the fabric and leave for 2-3 minutes. Rinse with clean water before wiping over with a soft dye-free cloth or towel and allowing to air dry.

• Do not use a power washer (pressure hose) to clean or rinse your King Living outdoor furniture.

 

Professional cleaners

Ensure that your preferred professional cleaner has experience working with King Living outdoor fabrics and is aware of cleaning and maintenance requirements. Please contact us for further information at www.kingliving.com/contact.

 

Oil-Based Stains

Immediately apply an absorbent such as corn starch directly on the oil-based stain. Let sit for 10 minutes and remove the excess using a straight edge or ruler. This helps remove the stain and prevents it from being pressed into the fabric. Then proceed with the cleaning process.

 

Seam-to-Seam Cleaning

When cleaning upholstered pieces, clean the entire surface area of the fabric, from seam to seam, instead of rubbing only the affected area. This method, along with an extractor, may be required to avoid water rings and stains.

 

Mould and Mildew Stain

King Living outdoor fabric is resistant to mildew growth, however, mildew may grow on dirt and other foreign substances if not removed from the fabric. To remove mould or mildew:

1. Prepare a solution of 250ml (1 cup, 8 3/4 fl oz) of bleach, 60ml (1/4 cup, 2 fl oz) of mild soap and mix with 4L (16 cups,1 gal) of water.

2. Spray on the entire area and allow to soak into the fabric for 15 minutes.

3. Clean the entire surface area with a sponge, clean towel or very soft bristle brush.

4. Rinse thoroughly to remove all soap residue.

5. Air dry.

For severe mould/mildew growth, bleach quantities may be increased. It is best to clean the entire surface area of the fabric to avoid water rings and stains.

 

Cleaning instructions for WeatherWeave™ and KingRope®

The quicker you attend to spills and stains, the easier they can be to remove. We also recommend a fortnightly hose down of your outdoor furniture, or as required. Spray on a mild cleaning solution or King-Care® Fabric Cleaner. Gently brush the solution into the fabric and leave for 2-3 minutes, rinse with clean water then wipe over with a soft dye-free cloth or towel and allow to air dry.

 

Helpful Hints

• It is best to clean the entire surface area of the fabric to avoid water rings and stains.

• Avoid scrubbing, hard bristle brushes, or any other abrasive cleaning method.

• King Living outdoor fabric should only be allowed to air dry.

• Chemical solvents may discolor King Living outdoor fabrics, so be sure to protect the area surrounding your cleaning space. Always rinse King Living outdoor fabric thoroughly.

• Bleach can have harmful effects on the natural environment. Please follow all safety and environmental precautions according to the bleach label.

 

 

Seat & Back Cushions  

 

   

 

 

 

King Living strives to provide the ultimate in comfort and support in all of its furniture designs.

 

Over time, your new King Living sofa will exhibit a soft, lived in appearance. Using your furniture is the best way to achieve maximum comfort and the desired appearance. For the most consistent outcome, we recommend that loose seat and back cushions are rotated regularly for even wear.

 

If your sofa has feather cushions, these will require a little more attention. The soft feather blend in King Living cushions is secured in channels, similar to a superior quality bed duvet. Channel lines may be slightly visible on the surface of some fabrics or leathers. This is a normal characteristic of high quality, soft feather blend cushioning.

 

King Living feather and Ultradown®* filled back and seat cushions need to be ‘plumped-up’ to maintain a neat appearance and shape. Pat the filling towards the centre area on seats and plump the back cushions regularly to ensure your cushions provide many years of comfort and support. Visit www.kingliving.com/support to learn more and watch a product care video demonstration.

 

*Ultradown® is a man made product exclusive to King Living. Made from specially selected grades of hollow microfibers, Ultradown® is blended and formed into cloud-like balls of varying density and size. Softer fibers deliver personal comfort while firmer fibers offer bounce-back shape resilience.

Removable tailored covers 

After years of enjoying your King Living furniture, it is comforting to know that the tailored covers can be easily removed and replaced for a fresh new look.

 

Why removable covers?

Removable covers allow you to change the appearance of your sofa whenever you feel like creating a whole new look. Unlike ordinary sofas, King Living never uses staples to attach fabric or leather to the frame. We use Velcro® fasteners, discreetly hidden beneath the base of the furniture, making it simple to professionally remove and replace the cover.

Contact the King-Care® team and our consultants will assist you with ordering replacement covers for your furniture. 

 

Cleaning covers

King Living prides itself on using only the most premium fabrics and luxurious leathers that are made to last. For spot cleaning, please follow the instructions on page 10 for leather and page 12 for fabric. If your furniture requires a deeper clean, please contact King-Care® and we’ll make the necessary arrangements.

 

 

 

 

Rugs 

 

   

 

To help preserve the beauty of your rug we recommend vacuuming it once a week to avoid dust and dirt becoming embedded in the fibers.

 

Appearance

You may notice upon delivery that the rug appears slightly different in color or texture to the Showroom sample. fibers may appear flattened and as a result a difference in color from the rug in the showroom may be evident – this is a normal occurrence due to the packaging methods and transit time. Within a few days the fibers will acclimatise and return to the desired appearance – a light vacuum with a non-rotating vacuum head, will also assist with the recovery. Sometimes a rug may appear a very different color depending on the angle you are viewing it from, this is due to the direction the fibers fall and is more pronounced on rugs made with Artsilk. Rotating the rug 180 degrees or viewing from both sides of the rug is necessary to determine the color is correct. Showroom samples may appear slightly different than a brand-new rug due to the high foot traffic and UV exposure, but are a good indication of how your rug will wear over time.

 

Design

The King Living design team have developed a new and exclusive collection of artisan rugs. Working closely with interior designers and architects they have drawn inspiration from the unique colors, hues and natural textures found in pristine landscapes from across Australia. Using the finest materials and artisan craftmanship to develop a selection of floor coverings that perfectly complement our sofa range and also reflect our unique Australian lifestyle.

 

Social

We have partnered with carefully chosen manufacturers that ensure the highest standards of production, environmental and social standards. Part of the profits from all of the rugs we sell go towards building and developing educational facilities within the towns the manufacturers are located in. All products are endorsed by the CARE & FAIR - program - guaranteeing child-free labour.

 

Shedding

Shedding is expected and very common with all rugs, more so where natural fibers are used such as linen or wool. Waterfall, Bicheno, Scarborough & Derwent for example. Natural fibers are spun together, and small fragments of the fiber break off and gather together as the rug is used.Shedding usually starts to decrease after 9 months but will lessen with use and time over that period. All of our rugs are treated prior to packing to remove the worst of the loose fibers however normal foot traffic and rubber soled shoes will cause shedding in the initial weeks of use, which is to be expected. Regular vacuuming with a non-rotating head vacuum cleaner on a low suction setting (if possible) will help to reduce the amount of time shedding occurs. The use of a pad or underlay, which are available through King Living showrooms, will also assist in minimising wear and tear.

 

Cleaning

In the event that an accidental spill has happened, or food has been dropped on your hand-crafted rug, time will be of the essence and there are some simple steps by which you can follow to avoid your rug being damaged further. Food or solids which have been accidentally dropped on your rug will need to be removed carefully. Scoop up the food with the dull edge of a knife or spoon ensuring that you do not increase the area that will require attention. Blot any remaining evidence of the food or liquid spill to extracting as much as possible prior to cleaning the area further. The cloth or towel should be replaced regularly. Do not rub this area as this will spread the liquid or residue, and the area impacted will become much larger to clean and could damage the pile of your rug.

 

Warranty

Our Rug warranty covers manufacturing faults for a 2year period, wear and tear including shedding and stains due to liquid or solid spills are not considered manufacturing faults.

 

Wool Blends – Spot clean as needed using a damp (not wet) cloth with plain water; don’t use soap or cleaning products, as they could damage or fade the rug.

 

Viscose/Artsilk – Spot clean immediately with white paper towel; never use liquids on viscose rugs as they are highly absorbent and if left for even a short amount of time may cause irreparable damage or discoloration to the fibers. - Another option is to use one part vinegar and one part water in a water bottle and spray a light mist and blot with a white towel or a baby wipe paying attention to the pile direction. Some Fabric softener can then be sprayed on to avoid the fibers from hardening and then using a hairdryer on the cool setting to dry.

 

If you are not confident doing this a professional clean should be highly recommended. Please refer to https://www.woolsafe.org/ who can direct you to the nearest professional cleaner in your area. This service is available to North America, East Asia, China and Australia and they also offer an online cleaning guide.



 Download Rug Care Guide

 Download Rug Placement Guide

 

 

 

 

 

RUGS BY COMPOSITION

RUG

COMPOSITION

Apollo

Wool & Nylon

Bicheno

100% Artsilk (Viscose)

Bronte

50% NZ Wool Loop & 50% Viscose

Casablanca

100% ArtSilk

Derwent

50% NZ Wool, 50% Art Silk (Viscose)

Patina

100% Tencel (Viscose/Artsilk)

Lonsdale

100% Banana Silk (Viscose/Artsilk)

Marion

100% Natural Wool

Marquina

50%wool/50% Artsilk

Oceania

100% Natural Wool

Scarborough

33% NZ Wool, 33% Viscose, 33% Linen

Waterfall

50% Natural Wool Loop, 50% Viscose

Esperance

100% Recycled Polyester.

Hawkesbury

100% Recycled Polyester

Grampians

100% pure undyed New Zealand wool

Lillico

100% pure New Zealand wool

Tullah

100% pure undyed New Zealand wool

Nomad

100% New Zealand wool

Avalon Indoor

100% PET recycled plastic

Antipodes

100% pure New Zealand wool 

Gambit Check

100% pure New Zealand wool 

Bruny

100% pure New Zealand wool

Underlay

100% needle punched polyester

 

 

 

 

   

 

As a natural product, timber veneer can feature variations in the grain, which adds to the style and personality of this material. No two trees are exactly the same.

 

Caring for timber is just as important as caring for fabrics and leathers. Gentle dusting with a clean microfiber cloth will help maintain the beauty of your timber veneer. King also recommends placing your timber veneer furniture away from excess heat and/or humidity, as this may cause the veneer to crack or warp as it expands and contracts due to temperature variations.

 

Keep your timber veneer furniture in pristine condition by avoiding exposure to direct sunlight or ultra violet light, which may cause discoloration or deterioration of the surface. Also place protective padding between the timber veneer and any object placed on it.

 

This should be thicker for heavy, hot or abrasive objects that may severely damage the wooden surface. We recommend using coasters to protect the surface from glassware.

 

To minimize scratches avoid dragging objects across the surface. We also recommend not writing directly on top of timber veneer surfaces as pen or pencil marks may show.

 

Clean any spills immediately, do not allow nail polish remover, hair spray, perfume or strong corrosive solvents to come in contact with the timber veneer, and do not use any chemicals, detergents or any product containing silicon to clean timber veneer.

 

 

 

 

Timber 

 

   

 

Timber is a beautiful natural product that has unique characteristics, including grain and color variations.

 

Natural materials like timber are vulnerable to expansion and contraction from changing temperatures. King recommends placing timber furniture away from direct sunlight to avoid warping and discoloration.

 

Regular cleaning and dusting will help to keep the surface in top condition. Once a month use a proprietary brand of furniture polish to protect the surfaces and nourish unsealed timber.

 

Be sure to test the polish on an inconspicuous area before use and follow application instructions carefully.

 

Do not use polishes containing silicon or products that leave a greasy film, and avoid general cleaning products on timber surfaces.

 

To minimize scratching timber surfaces, avoid dragging objects across the surface.

 

Hot or cold objects such as drinks or bottles, placed directly onto surface may leave marks. We recommend using a coaster or other form of protection.

 

Teak

 

   

 

About Teak

Teak is an incredibly durable timber for outdoor furniture. Its density and naturally high oil content prevent rot and protect against fungus and wood-boring pests. King Living products are finished with an outdoor oil coating for extra protection. 

If teak is exposed to outdoor elements, it will gradually develop a beautiful silver-grey patina. This is a natural characteristic of the timber that strengthens its natural defenses against external elements over time. The rate that weathering occurs depends on climate, exposure to outdoor weather, and commitment to care and maintenance. 

Despite this, weathered teak can be restored to its original appearance with deep cleaning and maintenance of the protective coating. We recommend the following guidelines to maintain its original or weathered appearance.

 

General Care and Maintenance

During the outdoor season, weekly cleaning is recommended. Sweep furniture with a soft hand brush and clean with mild (pH-neutral) soapy water and a microfiber cloth or sponge. Hose the furniture to keep the teak as wet as possible, and wipe in the direction of the wood grain during cleaning. 

  • Clean fallen leaves and debris, bird droppings, and food and beverage spills immediately to avoid staining and mold.
  • Move vases, pottery, and other objects regularly to avoid staining and mold. Avoid plastic tablecloths as this can affect moisture circulation around the timber.
  • Ensure furniture is covered between outdoor seasons and avoid letting water lie dormant on furniture. King Living WeatherGuard covers are available to protect your furniture pieces and are recommended.Ensure teak is clean and dry before covering.
  • Avoid cleaning in direct sun and ensure furniture is cooled down before you start the cleaning process.
  • Use protective gloves and ensure that water run-off will not damage sensitive flooring.
  • DO NOT use a high-pressure cleaner, steamer, abrasive sponges, steel brushes, or any abrasive cleaners.
  • Teak expands and contracts due to changes in climate. Hairline cracks may form in the wood grain over time. This does not affect the structural integrity of the timber.
  • Due to the high oil content of teak, oil surfacing can occur when exposed to rain and humidity. This can develop multiple times before naturally subsiding after several months. Deep cleaning will remove affected areas.

 

Deep Cleaning

Use a dedicated teak cleaner for deep cleaning. Follow the instructions on your cleaning product. 

Stubborn stains can be sanded off lightly with 120-grit sandpaper. Be mindful that sanding can remove the protective coating, which will need to be re-applied. To avoid color changes in newly sanded areas, sand the entire surface and re-apply a protective coating. See below for information on oil application. 

 

Oil Application / Recommended Products

King Living teak is treated with a coat of UV-protecting oil. We recommend that a teak-specified oil be re-applied at the beginning and end of the outdoor season, or once a year after thorough cleaning. 

Ensure that the teak is clean, dust free, and completely dry before applying an oil coating, and follow the instructions recommended for your product. 

 

 

 

 

Powder Coat

 

   

 

Regular Cleaning

To maintain the pristine condition of your powder-coated steel products, it's important to clean them regularly to eliminate dirt, dust, and debris. If you live in a coastal environment, we recommend more frequent cleaning to prevent the accumulation of salt buildup. To clean, use a mixture of mild detergent or soap and water along with a soft cloth or sponge. We advise against abrasive cleaners or scrub brushes that could potentially scratch the surface.

 

Thorough Rinsing

After cleaning, make sure to thoroughly rinse the product with clean water. This step is essential to remove any residual cleaning solution, which could lead to discoloration or damage over time if left unchecked.

 

Avoid Harsh Chemicals

Protect the integrity of the powder-coated surface by avoiding the use of harsh chemicals, alcohol-based solutions, solvents, or ammonia-based cleaners. These substances have the potential to degrade the coating and compromise its protective qualities.

 

Promptly Address Stains and Spills

In case you come across stains or spills on the powder-coated surface, it's recommended to address them promptly. Timely cleaning can prevent stains from becoming more stubborn and difficult to remove.

 

Combat Rust

While powder-coated steel is resistant to rust, any minor scratches or chips in the coating might expose the underlying metal, leading to rust formation.

 

Gentle Cleaning Methods

Please refrain from using pressure washers, as they could potentially harm the powder-coated surface. Opt for gentle cleaning methods utilising a soft sponge or cloth.

 

Wax or Sealant Application

Enhance the longevity and visual appeal of your powder-coated steel products by applying a non-abrasive car wax or a specialised sealant designed for outdoor metals. This added layer of protection will contribute to the vibrancy and durability of the powder coating.

 

Seasonal Storage Consideration

If you live near the coast, it's advisable to consider using our range of WeatherGuard™ Covers or storing your powder-coated steel items indoors during off-season periods. This proactive measure shields them from prolonged exposure to the elements, preserving their appearance and structural integrity.

Stainless Steel  

 

   

 

 

 

The stylish finish of stainless steel requires some upkeep to maintain its reflective beauty.

 

Although not guaranteed to remain free from corrosion, following these instructions can help to maintain the finish of your stainless steel.

 

When cleaning, wipe with a damp cloth and dry the surface thoroughly. To remove day to day marks, mild soap and water should be sufficient. More stubborn stains can be removed with commercial grade cleaners suitable for use on stainless steel. Attend to the stain gently to avoid scratching the surface, and do not use abrasive cleaners on stainless steel pieces as these can permanently dull or damage the finish of the surface.

 

Completely remove all cleaner residue and use a reputable brand of stainless steel polish to protect the surface from corrosion, to create an “as new” shine. When using specific purpose cleaning products please avoid contact with any fabric or leather on your furniture.

 

 

 

Chrome Plated Steel 

 

   

 

 

 

Chromium plated steel furniture can have a long-lasting, lustrous finish if it’s well cared for and regularly cleaned.

 

Gently wipe away dust and dirt, being careful not to scratch the surface. We recommend cleaning with mild soap and warm water (max 40ºC/ 104°F), using a clean sponge or cloth. Then rinse with clean water and dry with a soft cloth.

 

Completely remove all cleaner residue and use a reputable brand of chromium plated steel polish to protect the surface from corrosion and to create an “as new” shine. When using specific purpose cleaning products please avoid contact with any fabric or leather on your furniture.

 

To ensure a long lasting, high quality finish, do not expose chromium plated steel to general cleaning products, water or salt air. Avoid silverware and brass cleaners as they may scratch and permanently damage the coating and never use steel wool (wire wool) to clean chromium plated steel.

 

 

 

 

Marble

   

 

 

Initial setup and continued care and maintenance of your marble

 
Overview

Marble is a natural product. Whilst all King Living stone products are sealed, marble that comes into contact with acidic substances including coffee, citrus, wine, tomatoes, alcohol and juice can cause etching. Etching can also be caused by water. Different to a stain, etching is actually a corrosive reaction to the stone, which removes its surface layer to reveal the raw marble beneath. Think of it as burning the top layer of the marble. As a result, the exposed area is lighter and duller than it previously was. A stain on the other hand, occurs when a liquid penetrates the marble and causes discoloration within the stone. While our products are sealed, this cannot prevent etching and re-applying a marble sealant may be required after extended use.

 

General Care and Precautions

• Use coasters and boards to prevent food and drink coming into direct contact with the marble wherever possible.

• Any substance that comes into contact with your marble should be absorbed immediately with a clean, damp cloth.

• Do not place hot items directly on the stone surface, we recommend the use of boards, trivets or mats

 

Staining

Note: Always test the cleaner or cleaning chemical you intend to use on a small inconspicuous area first.

General guidelines for stain removal:

1. Remove any loose debris

2. Blot spills; wiping the area will spread the spill

3. Flush the area with plain water and mild soap and rinse several times.

4. Dry the area thoroughly with a soft cloth.

5. Repeat as necessary.

6. If the stain persists use the ‘Stain Index’ on page 29 as a guide to troubleshoot

 

Etching

We apply penetrative sealers and waxes depending on the type of marble during production to reduce the porosity of the stone, this means quickly wiped spills are less likely to etch the marble. It is important to note that etching can occur even with the best sealer’s. Etch marks are caused by acidic substances left on the surface of the stone. Some materials will etch the finish but not leave a stain whilst others will do both.

 

Etch Removal

1. Refer to the ‘Stain Index’ on page 29 of this document and remove the stain using the appropriate method outlined for the stain type.

2. Spritz the surface with fresh water and apply a marble polishing powder (These powders are readily available from your local hardware store)

3. Rub the powder onto the stone with a damp cloth or by using a buffing pad. Continue buffing until the etch mark disappears and the marble surface shines.

Note: For deep etching contact your local stone restorer for refinishing or repolishing etched areas that you cannot reverse.
Unfortunately, etching is difficult to reverse on marble once it has occurred as it’s a chemical reaction.

 

Marble Poultice

It is quite difficult to completely remove set in stains from marble. Using the products and methods outlined in the ‘Stain Index’ should considerably improve the appearance of the stained marble surface however, a marble poultice can assist in drawing out and removing deep stains. Poultice materials include powdered chalk, white moulding plaster, talc or baking soda.

Note: Always test the poultice you intend to use on a small inconspicuous area first;

1. Mix your chosen poultice material with water, or the substance(s) listed in the ‘Stain Index’ to form a thick paste.

2. Spritz the stained area with clean, fresh water

3. Spread a thin layer of the poultice (0.5cm) over the stained area using a plastic spatula

4. Cover the poultice with plastic wrap and tape it in place

5. Let the poultice stay on the site for about 24 to 48 hours, so that it can dry out completely. The liquid cleaner or chemical will draw out the stain into the absorbent material during the drying process

6. When the paste is fully dry, use a cloth soaked in warm, soapy water to wipe away the paste Note: Do not scrape the poultice off, as you risk scratching the marble surface.

7. Rinse with clean water and buff dry with a soft microfiber cloth

8. If the stain is still visible, repeat the entire process.

Several applications may be necessary, depending on the type of the stain and the time it has had to set in. Applying a poultice will certainly yield good results, considerably improving the appearance of the stained marble surface.
However, some stains may not be completely removed. If the stain doesn’t come out after three (3) poultice applications consult professional stone refinishers.

 

Stain Index
Warning: Never mix ammonia with bleach, this combination creates a toxic and lethal gas.
Oil Based

Stain Types: Cosmetics, Grease, Tar, Cooking Oils and/or Milk

Identifier: An oil-based stain will darken the stone and normally must be chemically dissolved so the source of the stain can be flushed or rinsed away.

Removal: Clean gently with a soft, liquid cleanser, a household detergent, ammonia, mineral spirits or acetone.

Organic

Stain Types: Coffee, tea, fruit, paper, food, flora and/or foliage

Identifier: May cause a pinkish-brown stain and may disappear after the source of the stain has been removed.

Removal: A solution of 12% hydrogen peroxide and a few drops of ammonia can be used to remove the stain. Once removed flush out the solution with fresh water.

Warning: Hydrogen peroxide may lighten the appearance of darker stones.

 

Metal

Stain Types: Iron, Rust, Copper and/or Bronze

Identifier: Iron or rust stains are orange to brown in color and follow the shape of the staining object such planters, trays and/or metal furniture. Metal stains result from the action of moisture between metal and stone surfaces

Removal: Metal stains must be removed with a poultice. (See section on Marble Poultice)

Note: Deep-seated, rusty stains are extremely difficult to remove, and the stone may be permanently stained.

 

Ink/Dyes

Stain Types: Pen, paint and/or ink

Removal: Light colored stones can be cleaned using hydrogen peroxide whilst dark stones can be cleaned using acetone. Paint that has caked onto the surface can be carefully scraped off using a razor blade.

Note: Latex and acrylic paints do not cause staining. Oil-based paints, putty, caulks and sealants may cause an oil-based stain. Refer to the section ‘Oil-Based’ for removal instructions.

Warning: Do not use paint thinners as these can etch the surface of the stone.

 

Abrasions

Slight surface scratches may be buffed with dry 0000 steel wool. Deeper scratches and chips and or gouges in the surface of the stone should be repaired and re-polished by a professional.

 

What finish do we use on King marble tops?

An Italian Manufactured top-quality concentrated wax, dissolved in a non-inflammable solvent is used on all marble surfaces in the King Living range. This product, born in 1937, is a paste with exceptional polishing and protective power, due to the extremely high quality of raw materials used in its preparation. Paste wax penetrates into the marble and if it is then rubbed with fine steel wool, a felt pad, or a dry woollen or cotton cloth, a uniform brilliant and long-lasting mirror-finish can be achieved. Its special composition fills and seals porosity in the material and covers small scratches.

 

Why do we use penetrative waxes (sealers) and not coatings?

We don’t use stone coatings or impervious sealers as they are sacrificial finishes, which means they require the whole surface to be professionally sanded back to the original stone and re-coated, this type of finish is more commonly used for flooring and kitchen counter tops, not so much for furniture applications as the feel & natural properties of the marble are diminished with this type of coating.

 

What is a coating or impervious sealer?

Coatings are usually acrylics, urethanes, epoxies, varnishes, lacquers etc. and have limited use on natural stone however there are some typical uses of these film forming polymers. The most common coating is the janitorial type floor finish that is applied to floors to maintain a physical barrier which isolates the stone surface from abrasion. These coatings are considered temporary or sacrificial and are used primarily because the coating is easier to restore when it gets damaged than the stone surface would be without the coating. In general, film-forming coatings are avoided on natural stone where possible.



 Download Marble Care Guide

 

 

 

 

Travertine

   

 

 

 

 

For regular maintenance of the product, remove any dirt, dust, or similar with a clean microfiber cloth or duster. If further cleaning is occasionally required, a cleaning solution of warm clean water and mild soap solution can be used. Always blot instead of wiping, as this could spread any staining. Dry thoroughly with a clean cloth to prevent any water spots.

 

1. Brush off any loose dirt and dust.

2. Further cleaning can be done with a clean cloth dampened in a warm water and mild soap solution. Clean with a blotting motion, do not wipe or rub marks or stains.

3. Dry thoroughly after cleaning with clean cloth to prevent water spots.

 

 

Always clean any spills immediately to help prevent permanent staining or damage to the travertine stone. For more stubborn spills ensure you use an alkaline-based cleaning solution (such as a warm water and mild bleach solution) as this stone is not acid-friendly

 

4. For stubborn stains, a warm water and mild bleach solution can be used to help draw the stain out. Dampen a clean cloth with the solution and place this on top of the stain. Let this sit for a minute before blotting the area. Do not wipe or rub stains as this could spread the stain.

5. Dry thoroughly after cleaning with clean cloth to prevent water spots.

 

Liquids such as red wine, coffee or tea may permanently stain the product due to the porous nature of travertine stone. Other acidic liquids may damage the surface of the stone and cause discoloration due to the acidic content. Coasters and placemats should be used to help prevent marks or stains.

 

 

Ceramic

 

   

 

 

 

The solid ceramic slabs we source for our furniture are made with a process that involves firing at very high temperatures, creating a high-performance porcelain sheet suitable for even the most extreme outdoor weather (and messiest of indoor!) conditions.

 

Ceramic surfaces are UV stable, heat resistant, and non-porous - meaning they don’t absorb spills and stain, and in outdoor applications won’t crack outside due to frost or lower temperatures.

 

Unlike natural stone products that need a little more attention and care, ceramic table tops require very low maintenance and won’t patina with wear. The finishes we’ve introduced into our range have been selected for they retain some of the look and tactile properties of natural stone that we love.

 

How to care for your ceramic furniture:

To prolong the life of your pieces, avoid heavy impact to any unsupported ceramic areas and the ceramic edge.

 

Cleaning and maintenance:

While spills and stains won’t absorb into the body of the material, we still recommend you clean up any spills when they occur to avoid surface build up. For a thorough clean use a soft cloth and water with a mild detergent.

 

 

Smart Pocket® Accessories

   

 

 

When everything is at your fingertips, relaxing on your sofa is much more enjoyable.

 

Available on selected sofa designs, Smart Pockets® can be positioned on the arms and back of your sofa, and can store magazines, books, remote controls as well as clever space-saving Smart Pocket® Accessories.

 
LED Reading Light

Create the perfect reading lighting for when you’re relaxing on your sofa. Beautifully designed with 360 degree rotation.

 
Swivel Table

Keep everything at hand with the stylish swivel table, available in a range of timber veneer or marble finishes.

 
Charge Table

Charge your Qi enabled smart devices, including your mobile phone and tablets.

 
Speaker Bracket

Create the ultimate entertainment hub with the Speaker Bracket, specifically designed for the Sonos Play:1 and Sonos One speaker.

 

Order online www.kingliving.com or at your nearest King Living Showroom.

 

 

 

 

Sleep+ Mattress care

   

 

 

Unlike traditional mattresses, King Sleep+ mattresses have been designed to allow full access to all components to easily clean and maintain your mattress throughout.

 

Each layer of the mattress is easily accessible for cleaning by simply unzipping the various compartments. Fit Covers can be unzipped and washed separately when required (please follow instructions below).

To clean and refresh your Sleep+ Mattress, simply unzip and remove the top Comfort Layer and gently vacuum inside the mattress using the upholstery cleaning attachment. For localised soiling, the area affected should be treated immediately.

King Living uses the highest quality materials in Sleep+ Mattresses that are designed to conform and adjust to your unique body shape. Indentations should be considered as normal.

 
Caring for your Fit Cover

Treatment for localised soiling: the area affected should be sponged gently using a natural wool detergent or mild soap flakes in lukewarm water, followed by two spongings with clean lukewarm water. Lightly compress the treated area between two towels to absorb excess water, and spread out flat to dry in a shady area.

Fit Covers should not be hung to dry. For WarmFit Covers, detach controller switch(es) before attempting to clean. Pilling may naturally occur however this does not affect the comfort or performance of the fabric.

 
Washing Sleep+ Fit Covers

To completely refresh your Fit Covers, unzip from the mattress and hand wash in warm water with a neutral wool detergent. Alternatively, Fit Covers can be machine washed on a gentle cycle, 40°C/104°F (30°C/ 86°F for WarmFit) when required. For WarmFit Covers, detach controller switch(es) before attempting to clean.

Fit Covers may be tumble dried - cold, for 15 minutes maximum or line dry over several clothes lines. Do not use pegs on WarmFit heating wires. Do not bleach, do not dry clean and do not iron Fit Covers.

Fit Please note that the connections to WarmFit Covers must always be kept free of moisture.

 

 

 

Anchoring your furniture 

   

 

 

Take the appropriate action to ensure your furniture is safe and secure in your home. King Living recommends that you anchor and secure your furniture to the floor and/or wall to avoid it becoming a toppling hazard. 

 

Refer to your King Living product Assembly Instructions to learn more about anchoring your furniture unit. If you are unsure or need to order an additional or replacement anchor kit, CLICK TO CREATE A NEW ENQUIRY

i  
 
Toppling furniture can cause serious injury.
  • Always mount/anchor TVs to furniture cabinets/wall with appropriate anchoring devices to avoid TVs becoming a toppling hazard. 
  • Keep toys and TVs off tall units like a tallboy or tall bookcase. Children climbing on drawers can cause toppling. 
  • Use child safety drawer locks to help prevent this. Place heavier items down low on/in a furniture unit as weight load distribution of items can affect stability. 
  • Placing furniture on thick pile carpet can affect stability. 
  • Ensure you use the most appropriate fixing for your wall type. Hardware stores can assist with appropriate hardware (wall fixings) for different wall types.
 
Learn more about toppling furniture:
  • Click here to download a Toppling Furniture Information Card.

  • Click here to visit the Product Safety website.

 

 

Cabana and Canopy Use Instructions

   

 

King Cabana Use Instructions

In higher winds, we recommend you keep the shade at the half position to minimize the chance of any damage caused by the wind. If not being used for an extended period, we recommend that the shades be stored to help protect them from the elements.

 

Aura Outdoor Canopy Use Instructions

We recommend that you close the canopy when not in use or in high wind conditions to avoid damage to the canopy and lounge. If not being used for an extended period, we recommend that the canopy be disengaged from the lounge and stored to better protect it from the elements.

CAUTION: Keep hands clear of mechanism while closing canopy, as it may pose an injury risk if they become entrapped. Children should be discouraged from opening or closing canopy unless under direct supervision.